This is an article on All Aluminum Alloy Uses!
1050 Extrusion coil for food, chemical and brewing industries. Various hoses, fireworks powder
1060 When both corrosion resistance and formability are required. But the strength requirements are not high. Chemical equipment is its typical use
1100 for processing requires good formability and high corrosion resistance. But, high-strength parts are not required. Such as chemical products, food industry installations and storage containers. Sheet metal workpieces, deep-drawn or spinning concave vessels. Welded parts, heat exchangers. Printed plates, nameplates, reflectors.
1145 Packaging and insulation foil. Heat Exchanger
1199 Electrolytic capacitor foil. Optical Reflective Deposition Film
1350 wire, conductive stranded wire. Busbar, Transformer Strip
2011 Screws and machined products requiring good cutting performance
2014 Apply to occasions requiring high strength and hardness (including high temperature). Aircraft heavy duty, forgings. Thick plates and extruded materials. Wheels and structural elements. Multistage rocket first stage fuel tank and spacecraft parts. Truck Frame and Suspension Parts
2017 is the first 2XXX series alloy to gain industrial application. The current scope of application is narrow. Mainly for rivets, general mechanical parts. Structural and Transport Structural Components. Propellers and Accessories
2024 Aircraft structures, rivets, missile components. Truck Wheels. propeller element
2036 Auto body sheet metal parts
2048 Aerospace vehicle structural parts, weapon structural parts
2124 Aerospace Vehicle Structural Parts
2218 Aircraft engine and diesel engine pistons. Aircraft engine cylinder head. Jet engine impeller and compressor ring
2219 Aerospace rocket welding oxidizer tank. Supersonic aircraft skins and structural parts. The working temperature is -270~300℃. Good weldability. High fracture toughness. T8 state has high resistance to stress corrosion cracking
2319 Welding pull 2219 alloy electrode. Filling Solder
2618 Die forgings and free forgings. Pistons and Aero Engine Parts.
2A01 Structural rivets with working temperature less than or equal to 100℃
2A02 Axial compressor blade of a turbojet engine with a working temperature of 200~300℃
2A06 Aircraft structure with working temperature of 150~250℃。Aircraft structure rivet with working temperature of 125~250℃ The strength of 2A10 is higher than that of 2A01 alloy. Structural rivets for aircraft with working temperature less than or equal to 100℃ Medium-strength structural parts and propeller blades of 2A11 aircraft. Transportation vehicles and building structures. Medium strength bolts and rivets for aircraft.
2A12 Aircraft skins, bulkheads, ribs, spars, rivets. Construction and Transportation Structure Pieces
2A14 Free forgings and die forgings with complex shapes
2A16 Spacecraft parts with working temperature of 250~300℃. Welded containers that work at room and high temperatures. Airtight Cockpit
2A17 Aircraft parts with working temperature of 225~250℃
2A50 Medium-strength parts with complex shapes
2A60 Plane engine compressor wheel, wind guide wheel, fan, impeller, etc.
2A70 aircraft skin. Aircraft engine pistons, wind guide wheels, roulettes, etc.
2A80 aero-engine compressor blades, impellers, pistons, expanding rings. Parts with high working temperature
2A90 Aviation engine piston
3003 is used for processing parts that require good formability, high corrosion resistance and good weldability. Or need both these properties and work with higher strength than 1XXX series alloys. Such as kitchenware, food and chemical product handling and storage devices. Tanks, tanks for transporting liquid products. Various pressure vessels and pipes for sheet processing
3004 All-aluminum can body. Parts with higher strength than 3003 alloy are required. Chemical production and storage facilities. Sheet metal parts, construction parts, construction tools. Various lighting parts
3105 Room dividers, baffles, mobile home panels, gutters and downspouts. Sheet metal forming parts. Bottle caps, corks, etc.
3A21 Aircraft fuel tanks, oil conduits, rivet wires, etc., building materials and food industry equipment.5005 is similar to 3003 alloy. It has medium strength and good corrosion resistance. Used as conductors, cookware, instrument panels, shells and architectural trim. The anodized film is brighter than the oxide film on 3003 alloy. And in harmony with the tone of 6063 alloy
5050 sheet can be used as the inner lining of refrigerators and refrigerators. Automobile air pipes, oil pipes and agricultural irrigation pipes. It can also process thick plates, pipes, bars, special-shaped materials and wires, etc.
5052 This alloy has good formability, corrosion resistance, candleability, fatigue strength and moderate static strength. Used in the manufacture of aircraft fuel tanks and oil pipes. And sheet metal parts of transportation vehicles and ships. Instruments, street lamp brackets and rivets, hardware products, etc.
5056 magnesium alloy and cable jacket rivets, zippers, nails. Aluminum-coated wire is widely used to process agricultural insect trap covers. And where high corrosion resistance is required
5083 is used where high corrosion resistance, good solderability and moderate strength are required. Such as ship, automobile and aircraft plate welding parts. Pressure vessels and refrigeration devices that require strict fire protection. TV tower, drilling equipment. Transportation equipment, missile elements, armor, etc.
5086 is used where high corrosion resistance, good solderability and moderate strength are required. Such as ships, cars, planes. Cryogenic equipment, TV tower. Drilling equipment, transportation equipment. Missile parts and decks
5154 Welded structures, storage tanks, pressure vessels, ship structures and offshore installations, transport tanks
5182 sheet is used for processing can lids. Auto body panels, steering panels, reinforcements. Brackets and other parts
5252 is used to manufacture decorative parts with higher strength. Decorative parts such as automobiles. Bright and transparent oxide film after anodization
5254 Hydrogen peroxide and other chemical product containers
5356 Welding aluminum-magnesium alloy electrodes and wires with magnesium content greater than 3%
5454 Welded structure, pressure vessel. Marine facilities pipeline
5456 armor plate, high-strength welded structure. Storage Tanks, Pressure Vessels, Ship Materials
5457 Polished and anodized trim parts for automobiles and other equipment
5652 Hydrogen peroxide and other chemical products storage container
5657 Polished and anodized trim for automobiles and other equipment. But in any case it must be ensured that the material has a fine grain structure
5A02 Aircraft fuel tank and conduit. Welding wire, rivet, ship structure
5A03 Medium strength welded structure. Cold stamping parts, welding containers, welding wire. Can be used to replace 5A02 alloy
5A05 welded structural parts, aircraft skin skeleton
5A06 Welded structure. Cold die forged parts. Welding and pulling the stressed parts of the container. Aircraft skin bone parts
5A12 welded structural parts. Bulletproof deck
6005 Extruded profiles and tubes. It is used for structural parts that require higher strength than
6063 alloy. Such as ladders, TV antennas, etc.
6009 Auto body panel 6010 sheet. car body
6061 requires various industrial structures with a certain strength, high weldability and corrosion resistance. Like making trucks. Tower building. Ships, trams, fixtures, mechanical parts. Precision machining of tubes, rods, shapes, and plates
6063 Architectural profiles. Irrigation pipes. Extrusion materials for vehicles, stands, furniture, fences, etc.
6066 Forgings and Welded Structural Extrusion Materials
6070 Extruded materials and tubes for heavy-duty welded structures and the automotive industry
6101 High-strength bars for buses. Electrical conductors and heat sinks, etc.
6151 is used for die forging crankshaft parts, machine parts and production rolling rings. Those are required to have good forgeability. high strength. Also, have good corrosion resistance.
6201 High-strength conductive rods and wires
6205 Thick Plates, Pedals and High Impact Extrusions
6262 Threaded high stress parts requiring better corrosion resistance than 2011 and 2017 alloys
6351 Extruded structural parts of vehicles, pipelines for water, oil, etc.
6463 Construction and various appliance profiles. And car trims with a bright finish after anodizing
6A02 Aircraft engine parts, forgings and die forgings with complex shapes
7005 Extruded material. For the manufacture of welded structures that have both high strength and high fracture toughness. Such as trusses, rods, and containers of transportation vehicles. Large heat exchangers, and parts that cannot be melted after welding. Used in the manufacture of sports equipment such as tennis rackets and softball bats
7039 Refrigerated containers, cryogenic equipment and storage tanks. Fire pressure equipment, military equipment. Armor plates, missile installations
7049 is used for forging parts that have the same static strength as 7079-T6 alloy but require high resistance to stress corrosion cracking. Such as aircraft and missile parts – landing gear hydraulic cylinders and extrusions. The fatigue properties of the parts are approximately equal to those of the 7075-T6 alloy. And the toughness is slightly higher
7050 Plates, extrusions, free forgings and die forgings for aircraft structural parts. The requirements for the alloy to manufacture such parts are: high resistance to exfoliation corrosion, stress corrosion cracking, fracture toughness and fatigue resistance.
7072 Air conditioner aluminum foil and ultra-thin strip. 2219, 3003, 3004, 5050, 5052, 5154, 6061, 7075, 7475, 7178 cladding of alloy plates and pipes
7075 is used in the manufacture of aircraft structures. High-stress structural parts and mold manufacturing requiring high strength and corrosion resistance
7175 is used to forge high-strength structures for aircraft.
T736 material has good comprehensive properties. That is, high strength, resistance to exfoliation corrosion and stress corrosion cracking, fracture toughness, and fatigue strength.
7178 Parts requiring high compressive yield strength for the manufacture of aerospace vehicles Aluminum-clad and unclad sheets for
7475 fuselage. Wing frames, stringers, etc. Parts with both high strength and high fracture toughness
7A04 Aircraft skin and screws. And stress components such as girder stringers, bulkheads, ribs, landing gear.