7A04 Aluminum Sheet

Description

7A04 Aluminum Sheet belongs to Al-Zn-Mg-Cu series aluminum alloy. It is the most commonly used super hard aluminum alloy.7A04 aluminum plate is an alloy that has been used for a long time and has a wide range of applications. It has high strength and good heat treatment strengthening effect. The ductility is moderate in the annealed and quenched states.

JC Metal China is a 7000 series aluminum sheet supplier. The main type is 7005,7050,7075,7A04,7A09 aluminum sheet.

Chemical composition

Si	Cu	Mg	Zn	Mn	Ti	Fe	Cr
≤0.50	1.4-2.0	1.8-2.8	5.0-7.0	0.20-0.60	≤0.10	0.00-0.50	0.10-0.25

7A04 Aluminum Sheet Characteristics

1. It has high resistance to spalling and stress corrosion cracking.
2. 7a04 aluminum plate has excellent tensile strength. Shear strength, high supporting strength, excellent fracture toughness and fatigue resistance.
3. High strength, excellent welding performance and low welding crack tendency. It is a high-strength weldable aluminum alloy sheet.

7A04 Aluminum Sheet Mechanical properties

Tensile strength σb (MPa)	≥530
Conditional yield strength σ0.2 (MPa)	≥400
Elongation δ10(%)	≥5

Specimen Size: all wall thickness

Note: longitudinal mechanical properties of tubes at room temperature

7A04 Aluminum Sheet Price

1. JC Metal China 7A04 Aluminum Sheet price = Ingot Cost/Raw aluminum cost + Processing cost.
2. 7A04 Aluminum alloy unit price is $/ton,$/kg,$/Pound,$/lbs.
3. 7A04 Aluminum Sheet price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
4. Business Term: FOB,CFR,CIF,DDP,DUP…
5. Payment Term: TT.LC.TT+LC…

Packing

1–Install wooden pallets. Use steel belts to reinforce them to avoid collisions during transportation.
2–Can be packed as per customer’s requirements.

Technical parameters

Typical alloy	7A04 aluminium plate
Material State	F、O、T6、T651、T7451、H112
Thickness	1mm-500mm
Width	＜2600mm
Length	＜8000mm
Typical application	Moulds, high-strength parts, precision structural parts, etc.

Market Applications

7A04 aluminum plates are mainly used in mechanical molds, injection molds, pressure cookers.

Related Products