7A09 Aluminum Sheet

Description

7A09 Aluminum Sheet belongs to Al-Zn-Mg-Cu alloy. It is an ultra-high-strength aluminum alloy. 7A09 has an excellent combination of high specific strength, fracture toughness and thermal conductivity. Through proper T6 aging treatment, the material can reach its peak strength. The alloy is widely used in industries such as molds and high-strength parts.

JC Metal China is a 7000 series aluminum sheet supplier. The main type is 7005,7050,7075,7A04,7A09 aluminum sheet.

Chemical Composition

Si	Cu	Mg	Zn	Mn	Ti	Fe	Cr
≤0.50	1.2-2.0	2.0-3.0	5.1-6.1	≤0.15	≤0.10	0.00-0.50	0.16-0.30

7A09 Aluminum Sheet Characteristics

1. The heat treatment strengthening effect is particularly good. The strength is high below 150 ℃. The low-temperature strength is particularly good.
2. High specific strength, good fracture toughness and thermal conductivity.
3. Good plasticity after solution treatment.

7A09 Aluminum Sheet Mechanical properties

Tensile strength σb (MPa)	≥530
Conditional yield strength σ0.2 (MPa)	≥400
Elongation δ10(%)	≥6

Specimen Size: all wall thickness

Note: longitudinal mechanical properties of tubes at room temperature

7A09 Price

1. JC Metal China 7A09 Aluminum Sheet price = Ingot Cost/Raw aluminum cost + Processing cost.
2. 7A09 Aluminum Alloy unit price is $/ton,$/kg,$/Pound,$/lbs.
3. 7A09 Sheet price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
4. Business Term: FOB,CFR,CIF,DDP,DUP…
5. Payment Term: TT.LC.TT+LC…

Packing

1–Install wooden pallets. Use steel belts to reinforce them to avoid collisions during transportation.
2–Can be packed as per customer’s requirements.

Technical parameters

Typical alloy	7A09 aluminum plate
Material State	F、O、T6、T651、T7451、H112
Thickness	1mm-500mm
Width	＜2600mm
Length	＜8000mm
Typical application	Molds, beauty equipment, notebook shells, etc.

Market Applications

7A09 aluminum plates are mainly used in the fields of molds, beauty equipment, notebook casings, high-strength parts, and heavy forgings.

Related Products